Our customer had a very old shower valve that was leaking and corroded. We cut out the old valve, installed a new valve with hot and cold connections, installed trim and shower head, and left an access panel in the wall so that next time around it’s easier to access
Sometimes you want a new hose spigot in a place where you don’t currently have access to one. We went into the crawlspace, located the nearest cold water line, tapped in, and drilled a hole in the block to install a new hose spigot
Customer had an old faucet and leaking tubular drain that she wanted to replace. We did both!
A leaky shower pan caused this customer to completely redo her shower, along with new shower valve, faucet, and trim
Sometimes its better to just replace old leaky faucets with new faucets and matching p-traps. Much better to spend money on a new fixture as opposed to trying to find an old cartridge for an old faucet/
An outdoor shower can be great, as long as you drain the system in the winter. This one wasn’t drained, and burst. We came over and cut and capped the lines, then showed back up to install a new valve. We put shutoffs on the inside so that next time around they could drain the fixture properly.
An old three handle faucet replaced with a new single handle with vanity plate and new pop-up drain assembly
Sometimes a new shower head and trim can really add to a bathroom. This customer had an old fixture that needed to be replaced, they supplied, we installed
Old shower faucets are prone to leaking from corrosion. This was the case for this homeowner in LaVergne, so we removed the old valve, roughed in a new shower valve, and installed the trim. Transformed the shower and eliminated to leaks!
A lot of homes in Nashville have old 3-handle shower faucets – sometimes they can be repaired, typically we recommend replacing with a new fixture to get a better result. We removed an old shower valve, roughed in a new one, and installed the trim. The shower is now like new!
